YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> Yaskawa SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL

Yaskawa SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL

Brand: Yaskawa
Product model: SGD7S-550A00A
Name: Touch screen
Sort: HARDWARE MANUAL (Analog Voltage/Pulse Train References)
File language: English
File size: 10.36MB
High performance, use the best type of servo unit (purpose type).
Maximum applicable motor capacity: 1.0kw.
Power supply voltage: three phase AC200V.
Interface: analog voltage, pulse sequence type (rotary servo motor).
Design sequence: A.
Hardware specification: base mounting type (standard).
Function: to support the absolute value of the system SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL SGD7S-550A00A
Use the best type of sigma -V-FT series
According to different uses, there are 5 equipped with a convenient function of the servo unit models.
FT001 (vibration suppression function to upgrade specifications): by strengthening the vibration suppression function, shorten the positioning time.
FT003 (pressure feedback function): high precision pressure control, to promote the high performance of the device SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL.
FT005 (support for rotary table purposes): with the rotation of the coordinate function and fixed point through the output function, can be smooth and high-precision control of rotary table.
FT006 (fixed point through the output function): no need to pass through the upper device can be set through the output (Chu Fa).
FT008 (absolute value system support): the absolute value of the system can be constructed by any upper controller SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL. Full closed loop module.
Maximum applicable motor capacity: 11kw.
Power supply voltage: three phase AC200V.
Interface: analog voltage, pulse sequence type (rotary servo motor).
Design sequence: A.
Hardware specifications: shelf installation type + paint.
Matching (software): no matching (standard).
Matching (parameters): no matching (standard).
Optional modules: full closed loop module.
Full closed loop control system is used to control the rotating servo motor.
Please install the servo unit.
Using the position feedback signal which is output by the external encoder (linear grating ruler) installed on the side of the machine to realize the high precision and high response.
External encoder capable of corresponding high resolution (linear grating). SGMCS small capacity type of direct drive servo motor.
Rated torque: M \/ 4.0N.
Servo motor outside diameter size: 280mm.
Serial encoder: 20 bit absolute value type (absolute value of 1 circles) (standard).
Design sequence: the outer diameter size of the servo motor is marked as N and M.
Flange specification: face C, load side.
Optional specifications: no matching.
Under the condition of no speed reducer, the load is directly driven.
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 6 ~ 600N \/ m, maximum speed: 250 ~ 500r\/min).
By using 20 bit high resolution encoder, the high precision can be carried out.
The use of hollow structure, convenient wiring and piping.
Use example:
Semiconductor manufacturing equipment.
Liquid crystal circuit board manufacturing equipment.
Various inspection and test equipment.
Electronic part packaging machine.
IC information processor.
IC inspection equipment.
A variety of automated machinery.
Robot。
Small capacity ratings and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: A.
Insulation withstand voltage: AC1500V 1 minutes SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL.
Protection mode: fully enclosed self cooling type IP42 (except for the rotating part of the output shaft).
The use of environmental humidity: 20 ~ 80%% (not dew) SGD7S-550A00A Analog Voltage/Pulse Train References Manual SGD7S-550A00A HARDWARE MANUAL.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Related products
Yaskawa
Single axis servo driver
SGD7S-330A00A002
Yaskawa Single axis servo driver SGD7S-330A00A002
Sigma -7 series servo unit SGD7S. Maximum app
Yaskawa
Single axis servo driver
SGD7S-200A20A002
Yaskawa Single axis servo driver SGD7S-200A20A002
Single axis servo driver SGD7S. Maximum appli
Yaskawa
Single axis servo driver
SGD7S-470A30A002
Yaskawa Single axis servo driver SGD7S-470A30A002
Single axis servo driver SGD7S. Maximum appli
Yaskawa
Single axis servo driver
SGD7S-R90A20A001
Yaskawa Single axis servo driver SGD7S-R90A20A001
Single axis servo driver SGD7S. Maximum appli