YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> Yaskawa SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide

Yaskawa SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide

Brand: Yaskawa
Product model: SGM7P-02AFE2E
Name: Air Thermo Station
Sort: Installation Guide
File language: English
File size: 21.92MB
Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 7.5Kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: high precision machine tool.
Shaft end: taper 1\/10, with parallel key.
Optional parts: with oil seal, DC90V brake.
High speed feed series: high speed running when no load SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGM7P-02AFE2E
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlSigma -V series servo motor SGMGV SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide.
Rated output: 450W (0.45KW).
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed) SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide.
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationEquipped with DeviceNet communication function type servo unit (servo controlled power supply drive type)
Maximum applicable motor capacity: 0.75kw.
Power supply voltage: single phase AC100V.
Interface: instruction selection and installation (linear servo motor).
Matching (hardware): paint.
Matching (software): standard.
Matching (parameter): standard.
Optional modules: DeviceNet module (servo control power supply driver).
Communication specifications for DeviceNet based on open field network.
The combination of the DeviceNet controller and the V can be used to implement motion control in a simple way.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information.
Through the network from the host controller to monitor the running status of the servo drive, alarm information.
Using the upper controller to manage the servo information, which can improve the maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce the cost and improve the reliability.
Because the upper controller and the servo unit are connected through the communication nettwork, the connection is greatly saved SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide.
Built in rich positioning function.
Can be from the upper controller (PLC or computer) to carry out a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of continuous rotary motion positioning, running and other rich positioning function SGM7P-02AFE2E Manual SGM7P-02AFE2E Installation Guide.
Related products
Yaskawa
Medium inertia, flat servo motor
SGM7P-08A7E6E
Yaskawa Medium inertia, flat servo motor SGM7P-08A7E6E
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-01AFA2S
Yaskawa Medium inertia, flat servo motor SGM7P-01AFA2S
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-08AFAH701
Yaskawa Servo motor with speed reducer SGM7P-08AFAH701
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-01AFA6S
Yaskawa Medium inertia, flat servo motor SGM7P-01AFA6S
SGM7P type rated speed: 3000r\/min of inert