YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> Yaskawa SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide

Yaskawa SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide

Brand: Yaskawa
Product model: SGM7P-04AFA2S
Name: AIR CLEAN UNIT
Sort: Installation Guide
File language: English
File size: 21.92MB
High performance, use the best type of servo unit (high performance).
Maximum applicable motor capacity: 7.5kw.
Power supply voltage: three phase AC200V.
Design sequence: A.
Hardware specification: rack mounting type.
Interface: MECHATROLINK-III communication command type (rotary servo motor).
Function: support 125 s communication cycle SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide.
High performance sigma shaped -V-EX series SGM7P-04AFA2S
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide. Servo motor type SGMAH (speed: 3000r\/min).
Power: 0.2kw.
Power supply voltage: single phase AC200V.
Serial encoder: 13 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw.
Optional parts: no brake oil seal.
Improve mechanical properties.
In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,
Compared with the original models, CPU computing time for its 1\/2, through the expansion of the new control algorithm,
Positioning time is shortened to the original product of 1\/3, to achieve a good response SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide.
The parameter setting and maintenance time is shortened.
In order to establish a high degree system in a short time, the use of the simplicity of the.
Flexible use of online automatic adjustment function,
Automatic adjustment of servo system with mechanical characteristics.
Then use the main loop \/ control circuit power separation and alarm tracking memory function, can be simple to carry out maintenanceSigma -V series servo motor SGMPS.
Rated output: 100W (0.1kw).
Power supply voltage: AC200V.
Serial encoder: 17 bit Delta (standard).
Design sequence: IP67 (standard).
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
Corresponding to the RoHS instruction: in accordance with the RoHS directive.
Medium inertia
Flat type deep short
Equipped with high resolution serial encoder (17 bit)
Max speed up to 6000r\/min
Variety is complete (100W ~ 1.5kW, with hold brake)
Standard using IP55. Also applies to IP67 (optional).
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resiistance grade: B SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide.
Insulation withstand voltage: AC1500V 1 minutes.
Protection mode: fully enclosed self cooling type IP65 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGM7P-04AFA2S Manual SGM7P-04AFA2S Installation Guide.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Related products
Yaskawa
Medium inertia, flat servo motor
SGM7P-15A7A6C
Yaskawa Medium inertia, flat servo motor SGM7P-15A7A6C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-15AFE61
Yaskawa Medium inertia, flat servo motor SGM7P-15AFE61
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-02AFE21
Yaskawa Medium inertia, flat servo motor SGM7P-02AFE21
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-08A7AH121
Yaskawa Servo motor with speed reducer SGM7P-08A7AH121
SGM7P type rated speed: 3000r\/min of inert