YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> Yaskawa SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual

Yaskawa SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual

Brand: Yaskawa
Product model: SGM7P-08A7AHB2C
Name: RS-232C Cable
Sort: User's Manual
File language: English
File size: 21.92MB
Sigma -v series servo unit SGDV.
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase AC200V.
Design sequence: B type.
Interface: MECHATROLINK- II communication command type (rotary servo motor).
Realize real time communication.
The maximum transmission speed of 10Mbps and can be set to the communication cycle 250 s ~ 4ms,
Achieved a maximum of 30 stations in the high speed control SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual SGM7P-08A7AHB2C Through the high speed of communication,
Can send and receive all kinds of control information in real time.
Energy saving and high efficiency.
A maximum of 30 stations can be connected to the communication lines, can significantly reduce the wiring costs and time.
The command connector of the upper controller only needs 1,
Pulse generator for D/A converter or position instruction without speed / torque command SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual.
High precision motion control is realized.
In addition to torque, position and speed control, but also to achieve high precision synchronization phase control.
Because the control mode can be switched on line, the complicated mechanical action can be realized more effectively and smoothly SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual. Sigma -V series servo motor SGMSV.
Rated output: 2.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withhstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V) SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual.
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGM7P-08A7AHB2C Manual SGM7P-08A7AHB2C User's Manual.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Related products
Yaskawa
Servo motor with speed reducer
SGM7P-08AFAH12C
Yaskawa Servo motor with speed reducer SGM7P-08AFAH12C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Medium inertia, flat servo motor
SGM7P-08AFE2S
Yaskawa Medium inertia, flat servo motor SGM7P-08AFE2S
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-01AFAHB0C
Yaskawa Servo motor with speed reducer SGM7P-01AFAHB0C
SGM7P type rated speed: 3000r\/min of inert
Yaskawa
Servo motor with speed reducer
SGM7P-02AFAH70C
Yaskawa Servo motor with speed reducer SGM7P-02AFAH70C
SGM7P type rated speed: 3000r\/min of inert