YASKAWA
Home >> Price >> YASKAWA >> SGD7S-R70A00A Market price | SGD7S-R70A00A Introduction
Brand sort

YASKAWA SGD7S-R70A00A Market price | SGD7S-R70A00A Introduction

Brand: YASKAWA
Country:
Name: Single axis servo driver
Price: 0
YASKAWA SGD7S-R70A00A
Direct drive type servo motor SGMCV type.
Rated torque: M \/ 8.0N.
Servo motor diameter: diameter of 175mm.
Serial encoder: 22 bit (single cycle absolute encoder).
Design sequence: A.
Flange: reverse load side.
Optional parts: high mechanical precision (axis offset, offset 0.01mm).
Under the condition of no speed reducer, the load is directly driven.
Can be realized from low speed to high speed of the strong smooth running
(instantaneous maximum torque: 12 ~ 75N \/ m, maximum speed: 500 ~ 600r\/min) SGD7S-R70A00A
By using 22 bit high resolution encoder, the high precision can be carried out.
The use of hollow structure, convenient wiring and piping.
Use example:
Semiconductor manufacturing apparatus.
Liquid crystal circuit board manufacturing device.
Various inspection and test equipment.
Electronic component packaging machine.
C information processor.
C inspection equipment.
A variety of automated machinery.
ManipulatorLarge capacity SGMVV type servo motor.
Rated output: 22KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 800r\/min.
The main mechanical structure: flange type, straight shaft (with keyway and screw).
Optional parts: keep the brake (DC24V), with dust.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenSigma -V series servo motor SGMSV.
Rated output: 5.0kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC90V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGD7S-R70A00A Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGD7S-R70A00A&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Single axis servo driver
SGD7S-200A00A
Yaskawa Single axis servo driver SGD7S-200A00A
Sigma -7 series servo unit SGD7S. Maximu
Yaskawa
Single axis servo driver
SGD7S-200A00A001
Yaskawa Single axis servo driver SGD7S-200A00A001
Sigma -7 series servo unit SGD7S. Maximu
Yaskawa
Single axis servo driver
SGD7S-3R8A30A002
Yaskawa Single axis servo driver SGD7S-3R8A30A002
Single axis servo driver SGD7S. Maximum
Yaskawa
Single axis servo driver
SGD7S-3R8A00A001
Yaskawa Single axis servo driver SGD7S-3R8A00A001
Sigma -7 series servo unit SGD7S. Maximu