YASKAWA
Home >> Price >> YASKAWA >> SGMGV-30DDC21 Market price | SGMGV-30DDC21 Introduction
Brand sort

YASKAWA SGMGV-30DDC21 Market price | SGMGV-30DDC21 Introduction

Brand: YASKAWA
Country:
Name: Rotary servo motor
Price: 0
YASKAWA SGMGV-30DDC21
Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 7.5Kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: high precision machine tool.
Shaft end: straight shaft with screw key.
Optional parts: no brake oil seal.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGMGV-30DDC21
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlServo motor type SGMPH (speed: 3000r/min).
Power: 0.2kw.
Power supply voltage: single phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft without key.
Optional parts: with oil seal, DC90V brake.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated.Sigma -V series servo motor SGMGV.
Rated output: 7.5kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
SGMGV-30DDC21 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGMGV-30DDC21&select=5


...more relevant model market price >>>>
Related products
Yaskawa
Rotary servo motor
SGMGV-55DDC6C
Yaskawa Rotary servo motor SGMGV-55DDC6C
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-03A3A2S
Yaskawa Rotary servo motor SGMGV-03A3A2S
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-13A3A2B
Yaskawa Rotary servo motor SGMGV-13A3A2B
Sigma -V series servo motor SGMGV. Rated
Yaskawa
Rotary servo motor
SGMGV-03D3A6S
Yaskawa Rotary servo motor SGMGV-03D3A6S
Sigma -V series servo motor SGMGV. Rated