Home
>> Products
>> Yaskawa
>> Servo driver / motor
>> SGDM series
>> SGMGH type servo motor
>> SGMGH-09ACC3C | Yaskawa Motor for high precision machine tool SGMGH-09ACC3C
SGMGH-09ACC3C | Yaskawa Motor for high precision machine tool SGMGH-09ACC3C
Yaskawa SGMGH-09ACC3C Product information and technical parameters：
Brand: Yaskawa
Name: Motor for high precision machine tool
Model: SGMGH-09ACC3C
Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 0.85kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: high precision machine tool.
Shaft end: taper 1\/10, with parallel key.
Optional parts: with DC24V brake.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number than the original product reduced by 1\/2.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed control
Servo motor type SGMPH (speed: 3000r/min).
Power: 0.4kw.
Power supply voltage: single phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC24V brake.
Partial flat series: the need to install the servo motor in a small space Yaskawa SGMGH-09ACC3C.
Flexible user system.
For you to build the best system to enrich the product line to support you SGMGH-09ACC3C
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated Yaskawa SGMGH-09ACC3C. Servo motor type SGMPH (speed: 3000r\/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit absolute value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with key.
Optional parts: with oil seal, DC24V brake Yaskawa SGMGH-09ACC3C.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedIndex function type servo unit (box type).
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Matching (hardware): basic installation type (standard).
Matching (software): standard.
Match (parameter): standard.
Optional module: index module.
Ordinary。
Through programming and serial programming, easy to achieve motion control.
Can also be installed in the Windows environment to support the tool (sigmawin +) start easily.
The I / O module can be simply connected to the controller.
Smart.
Support the operation of the main purpose of the positioning of the operating table based on the.
The maximum number of programmmable positioning points to 256 points SGMGH-09ACC3C.
With external positioning, jogging speed table operation, the origin of the reversal, rich features, such as programmable signal output.
Input I / O points: 19 points, output: 16 points.
Fast.
HHigh speed and high precision positioning of high performance V series combination SGMGH-09ACC3C.
Motion control can be achieved without the use of motion controller.
Power: 0.4kw.
Power supply voltage: single phase AC200V.
Serial encoder: 16 bit relative value.
Design sequence: A.
Shaft end: straight shaft with screw key.
Optional parts: with oil seal, DC24V brake.
Partial flat series: the need to install the servo motor in a small space Yaskawa SGMGH-09ACC3C.
Flexible user system.
For you to build the best system to enrich the product line to support you SGMGH-09ACC3C
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated Yaskawa SGMGH-09ACC3C. Servo motor type SGMPH (speed: 3000r\/min).
Power: 0.75kw.
Power supply voltage: three phase AC200V.
Serial encoder: 16 bit absolute value.
Design sequence: Waterproof standard IP67.
Shaft end: straight shaft with key.
Optional parts: with oil seal, DC24V brake Yaskawa SGMGH-09ACC3C.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operatedIndex function type servo unit (box type).
Maximum applicable motor capacity: 0.4kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Matching (hardware): basic installation type (standard).
Matching (software): standard.
Match (parameter): standard.
Optional module: index module.
Ordinary。
Through programming and serial programming, easy to achieve motion control.
Can also be installed in the Windows environment to support the tool (sigmawin +) start easily.
The I / O module can be simply connected to the controller.
Smart.
Support the operation of the main purpose of the positioning of the operating table based on the.
The maximum number of programmmable positioning points to 256 points SGMGH-09ACC3C.
With external positioning, jogging speed table operation, the origin of the reversal, rich features, such as programmable signal output.
Input I / O points: 19 points, output: 16 points.
Fast.
HHigh speed and high precision positioning of high performance V series combination SGMGH-09ACC3C.
Motion control can be achieved without the use of motion controller.
...More relevant models >>>>
Last one: Yaskawa Motor for high precision machine tool SGMGH-05ACC3C
next one: Yaskawa Motor for high precision machine tool SGMGH-13ACC3C
Related download