Home
>> Products
>> Yaskawa
>> Servo driver / motor
>> SGDM series
>> SGMPH type motor
>> SGMPH-02B1A61 | Yaskawa Servo motor SGMPH-02B1A61
SGMPH-02B1A61 | Yaskawa Servo motor SGMPH-02B1A61
Yaskawa SGMPH-02B1A61 Product information and technical parameters：
Brand: Yaskawa
Name: Servo motor
Model: SGMPH-02B1A61
Servo motor type SGMPH (speed: 3000r\/min).
Power: 0.2kw.
Power supply voltage: single phase AC100V.
Serial encoder: 16 bit absolute value.
Design sequence: A.
Shaft end: straight shaft with screw key.
Optional parts: no brake oil seal.
Partial flat series: the need to install the servo motor in a small space.
Flexible user system.
For you to build the best system to enrich the product line to support you.
Products with single phase 200V, single phase 100V, three-phase 200V,
And for the absolute value encoder, a variety of motor with brake, belt speed reducer.
And then, because of its compliance with international standards, in the world can be assured that the use of.
Smooth running, there is a very seasonal rate of observation and control,
The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated
Equipped with DeviceNet communication function type servo unit (external power drive type)
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Match (hardware): paint.
Matching (software): standard Yaskawa SGMPH-02B1A61.
Match (parameter): standard.
Optional modules: DeviceNet module (external power driver) SGMPH-02B1A61
Specification for open field network communication based on DeviceNet.
The combination of the DeviceNet field bus controller and the V can be implemented in a simple way for motion control.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information Yaskawa SGMPH-02B1A61.
Monitor the running status of the servo drive system from the host controller through the network.
Using the upper computer to manage the servo information, improve maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce cost, improve reliability.
Because the upper controller and the servo unit are connected through the communication network, the connection is greatly saved Yaskawa SGMPH-02B1A61.
Built in rich positioning function.
Can be from the upper controller (programmable controller or computer) on a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of the continuous rotation movement, positioning, running and other rich positioning function.Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 11Kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: high precision machine tool.
Shaft end: straight shaft without key.
Optional parts: with oil seal.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGMPH-02B1A61.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number tthan the original product reduced by 1\/2 SGMPH-02B1A61.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed control
Maximum applicable motor capacity: 1.5kw.
Power supply voltage: three phase ac200v.
Interface: instruction selection and installation (rotary servo motor).
Match (hardware): paint.
Matching (software): standard Yaskawa SGMPH-02B1A61.
Match (parameter): standard.
Optional modules: DeviceNet module (external power driver) SGMPH-02B1A61
Specification for open field network communication based on DeviceNet.
The combination of the DeviceNet field bus controller and the V can be implemented in a simple way for motion control.
Can make use of the city''s rich DeviceNet support software.
Can use the upper controller to manage the servo information Yaskawa SGMPH-02B1A61.
Monitor the running status of the servo drive system from the host controller through the network.
Using the upper computer to manage the servo information, improve maintenance (shorten the debugging time, improve the efficiency of maintenance operations).
Save wiring, reduce cost, improve reliability.
Because the upper controller and the servo unit are connected through the communication network, the connection is greatly saved Yaskawa SGMPH-02B1A61.
Built in rich positioning function.
Can be from the upper controller (programmable controller or computer) on a variety of simple positioning action.
Equipped with simple positioning, continuous rotation, and return to the origin of the continuous rotation movement, positioning, running and other rich positioning function.Servo motor SGMGH type.
Rated speed: 1500r\/min.
Power: 11Kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit absolute value.
Design sequence: high precision machine tool.
Shaft end: straight shaft without key.
Optional parts: with oil seal.
High speed feed series: high speed running when no load.
Complete separation of the main circuit and the control circuit,
Alarm can only turn off the main circuit power supply, easy to maintain SGMPH-02B1A61.
Parameter setting device.
The parameters can be directly entered by the servo drive body.
Saving wiring.
Using a serial encoder, encoder wiring number tthan the original product reduced by 1\/2 SGMPH-02B1A61.
Multi in one control: the use of the parameters of the switch can not use the torque, position, speed control
...More relevant models >>>>
Last one: 
next one: Related download